clone side cover question

[Leon Knox]

trying to get legal under new clone rules do we just drill the head of side cover bolts and saftey wire them bolt to bolt not sure how else you would do it but wont to make sure thanks

[Mike Bray]

That's how I would do it. If you don't want to hassle with drilling bolts you can buy them at http://www.drilledheadbolts.com/

Here's a great link for torque specifications http://www.affordablegokarts.com/torquevalues.php

[Leon Knox]

any idea wich bolts it is not sure in what thread type

[Mike Bray]

Spec says M8x30 and torque to 205 pound inch (17 pound ft)

[Michael Hoffman]

Which side needs to be wired the pull start side or the clutch side???

Mike

[Kevin Crowe]

The clutch side, you should only have to safety the 4 bottom bolts, the 2 top ones should butt up against the chain guard.

[Michael Hoffman]

I wired all six,I was there may as well do it.


Thanks Mike