It is currently Sat Nov 22, 2014 5:53 pm
   
Text Size

What size bolts to hold gear to gear hub?

Information & Questions about karting in general.

Moderator: Kevin Crowe

What size bolts to hold gear to gear hub?

Postby Rich Luckie » Tue Mar 10, 2009 8:25 pm

I am needing to get some more bolts to attach the gear to the gear hub. I don't have access to a kart at the moment to look. Does anyone know off hand what size they are? Thanks.
Rich Luckie
 

bolt size

Postby John Ray » Tue Mar 10, 2009 11:08 pm

typically the bolts will be: if metric 6mmx1 or if american 1/4 28 all will have to have a locking style nut or a drilled bolt for a saftey wire. nylock style nuts are not allowed. hope this helps

john ray
J RAY
John Ray
NTK President
 
Posts: 151
Joined: Sat Sep 08, 2007 11:47 am

Postby Rich Luckie » Wed Mar 11, 2009 7:08 pm

Yes that helps alot. Thanks.
Rich Luckie
 

Postby Wayne Riedel » Wed Mar 25, 2009 10:19 pm

WHAT? OK. John is right if you are bolting on a brake disk. metal locking nuts or bolts with safety wire going thru them and no plastic locking nuts. The bolt size is right for sprockets and I use the plastic locking nuts.
Wayne #8's
Wayne Riedel
 
Posts: 57
Joined: Mon Aug 27, 2007 11:02 pm


Return to General Karting

Who is online

Users browsing this forum: No registered users and 1 guest


Who is online

In total there is 1 user online :: 0 registered, 0 hidden and 1 guest (based on users active over the past 5 minutes)
Most users ever online was 168 on Wed Jul 04, 2012 1:25 am

Users browsing this forum: No registered users and 1 guest

Login Form