clone side cover question

Discussion forum for 4-Cycle classes.

Moderators: Bob Schabel, Daniel Esparza

Post Reply
Leon Knox
NTK Member
Posts: 28
Joined: Sun Apr 24, 2011 9:21 am

clone side cover question

Post by Leon Knox » Sat Feb 23, 2013 12:40 pm

trying to get legal under new clone rules do we just drill the head of side cover bolts and saftey wire them bolt to bolt not sure how else you would do it but wont to make sure thanks

Mike Bray
NTK Member
Posts: 11
Joined: Thu Nov 22, 2012 11:17 pm
Location: Coppell, TX
Contact:

Re: clone side cover question

Post by Mike Bray » Sat Feb 23, 2013 1:56 pm

That's how I would do it. If you don't want to hassle with drilling bolts you can buy them at http://www.drilledheadbolts.com/" onclick="window.open(this.href);return false;

Here's a great link for torque specifications http://www.affordablegokarts.com/torquevalues.php" onclick="window.open(this.href);return false;

Leon Knox
NTK Member
Posts: 28
Joined: Sun Apr 24, 2011 9:21 am

Re: clone side cover question

Post by Leon Knox » Sat Feb 23, 2013 2:49 pm

any idea wich bolts it is not sure in what thread type

Mike Bray
NTK Member
Posts: 11
Joined: Thu Nov 22, 2012 11:17 pm
Location: Coppell, TX
Contact:

Re: clone side cover question

Post by Mike Bray » Sat Feb 23, 2013 5:26 pm

Spec says M8x30 and torque to 205 pound inch (17 pound ft)

Michael Hoffman
NTK Member
Posts: 2
Joined: Sat Mar 09, 2013 9:42 am

Re: clone side cover question

Post by Michael Hoffman » Sun Mar 17, 2013 1:08 pm

Which side needs to be wired the pull start side or the clutch side???

Mike

Kevin Crowe
NTK Points Chairman
Posts: 28
Joined: Tue May 25, 2010 12:53 pm
Location: Fort Worth, TX

Re: clone side cover question

Post by Kevin Crowe » Sun Mar 17, 2013 5:44 pm

The clutch side, you should only have to safety the 4 bottom bolts, the 2 top ones should butt up against the chain guard.
Kevin Crowe
80cc Shifter
CRG KT-1, #26
Honda CR80

Michael Hoffman
NTK Member
Posts: 2
Joined: Sat Mar 09, 2013 9:42 am

Re: clone side cover question

Post by Michael Hoffman » Sun Mar 17, 2013 7:54 pm

I wired all six,I was there may as well do it.


Thanks Mike

Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests