It is currently Sun Sep 21, 2014 10:09 am
   
Text Size

clone side cover question

Discussion forum for 4-Cycle classes.

Moderators: Kevin Crowe, Daniel Esparza

clone side cover question

Postby Leon Knox » Sat Feb 23, 2013 12:40 pm

trying to get legal under new clone rules do we just drill the head of side cover bolts and saftey wire them bolt to bolt not sure how else you would do it but wont to make sure thanks
Leon Knox
NTK Member
 
Posts: 47
Joined: Sun Apr 24, 2011 9:21 am

Re: clone side cover question

Postby Mike Bray » Sat Feb 23, 2013 1:56 pm

That's how I would do it. If you don't want to hassle with drilling bolts you can buy them at http://www.drilledheadbolts.com/

Here's a great link for torque specifications http://www.affordablegokarts.com/torquevalues.php
Mike - Arrow X1 Rotax
Angel - Arrow AX9 Rotax
Oliver - Top Kart Kid Kart
Mike Bray
NTK Member
 
Posts: 23
Joined: Thu Nov 22, 2012 11:17 pm
Location: Coppell, TX

Re: clone side cover question

Postby Leon Knox » Sat Feb 23, 2013 2:49 pm

any idea wich bolts it is not sure in what thread type
Leon Knox
NTK Member
 
Posts: 47
Joined: Sun Apr 24, 2011 9:21 am

Re: clone side cover question

Postby Mike Bray » Sat Feb 23, 2013 5:26 pm

Spec says M8x30 and torque to 205 pound inch (17 pound ft)
Mike - Arrow X1 Rotax
Angel - Arrow AX9 Rotax
Oliver - Top Kart Kid Kart
Mike Bray
NTK Member
 
Posts: 23
Joined: Thu Nov 22, 2012 11:17 pm
Location: Coppell, TX

Re: clone side cover question

Postby Michael Hoffman » Sun Mar 17, 2013 1:08 pm

Which side needs to be wired the pull start side or the clutch side???

Mike
Michael Hoffman
NTK Member
 
Posts: 8
Joined: Sat Mar 09, 2013 9:42 am

Re: clone side cover question

Postby Kevin Crowe » Sun Mar 17, 2013 5:44 pm

The clutch side, you should only have to safety the 4 bottom bolts, the 2 top ones should butt up against the chain guard.
Kevin Crowe
80cc Shifter
CRG KT-1, #26
Honda CR80
Kevin Crowe
NTK Points Chairman
 
Posts: 81
Joined: Tue May 25, 2010 12:53 pm
Location: Fort Worth, TX

Re: clone side cover question

Postby Michael Hoffman » Sun Mar 17, 2013 7:54 pm

I wired all six,I was there may as well do it.


Thanks Mike
Michael Hoffman
NTK Member
 
Posts: 8
Joined: Sat Mar 09, 2013 9:42 am


Return to 4-Cycle

Who is online

Users browsing this forum: No registered users and 1 guest

cron

Who is online

In total there is 1 user online :: 0 registered, 0 hidden and 1 guest (based on users active over the past 5 minutes)
Most users ever online was 168 on Wed Jul 04, 2012 1:25 am

Users browsing this forum: No registered users and 1 guest

Login Form