Search found 11 matches
- Tue Jan 06, 2015 8:02 am
- Forum: Shifter Karts
- Topic: battle shifter
- Replies: 2
- Views: 11218
Re: battle shifter
There is a class in Norman, OK that is a "run what ya brung" so if you have one and want to play with it, that is probably the closest.
- Wed Aug 01, 2012 8:12 pm
- Forum: Shifter Karts
- Topic: What gears & jetting to use?
- Replies: 2
- Views: 10470
Re: What gears & jetting to use?
168 if its 100+ like it has been, with the RLV V4, #6 slide, D needle. To start in the morning when its like 85, start at 172-175. Also worth noting that I run conservative nowadays. ;0)
- Wed Apr 18, 2012 9:10 am
- Forum: Shifter Karts
- Topic: 80cc Shifter pipe
- Replies: 2
- Views: 10660
Re: 80cc Shifter pipe
Here's a good one.....
http://sharkshifter.com/zc/index.php?ma ... ts_id=1001" onclick="window.open(this.href);return false;
http://sharkshifter.com/zc/index.php?ma ... ts_id=1001" onclick="window.open(this.href);return false;
- Sat Jan 14, 2012 4:28 pm
- Forum: General Karting
- Topic: Newbie - Looking for Information
- Replies: 4
- Views: 9751
Re: Newbie - Looking for Information
Welcome! Always good to have more folks coming out. There are several classes you might want to look into, depending on budget, speed desired, amount of work to do on the kart, etc. At NTK there are several classes that always have close, fun racing. Chonda, Yamaha, and Rotax. The chassis are simila...
- Sun Oct 16, 2011 5:32 pm
- Forum: General Karting
- Topic: Repair underway, help needed....
- Replies: 4
- Views: 10203
Re: Repair underway, help needed....
That all makes sense. I appreciate it guys
- Mon Oct 10, 2011 5:14 pm
- Forum: General Karting
- Topic: Repair underway, help needed....
- Replies: 4
- Views: 10203
Re: Repair underway, help needed....
Gothca. That makes sense, thx!
- Wed Oct 05, 2011 9:55 pm
- Forum: General Karting
- Topic: Repair underway, help needed....
- Replies: 4
- Views: 10203
Repair underway, help needed....
Guys, I may realize later some of these are dumb questions, but just to clarify.... What is the diff between the magnesium and alum bearing carriers for my shifter axle? Just weight? How do I tell the diff between the Douglas mag and mag low volume wheels? Are these ceramic bearings I am seeing out ...
- Wed Oct 05, 2011 9:48 pm
- Forum: Shifter Karts
- Topic: Few shifter kart questions
- Replies: 2
- Views: 12396
Re: Few shifter kart questions
Yeah, rulebook helps a lot. However, there are several major points... 99-02 CR125 STOCK motor with a 38mm Keihin PWM or PWK carb. Look at Sudco for this. The motor should be built with the 96 6-speed. Key is BONE STOCK. No grinding polishing, re-coating of anything. Reeds are open, but must fit the...
- Wed Jan 05, 2011 11:20 am
- Forum: Shifter Karts
- Topic: How do I get started? I want to give it a try!
- Replies: 8
- Views: 19916
Re: How do I get started? I want to give it a try!
Jeremy, How goes the search for a kart? I know that two of the shops here local have used chassis, maybe give mark at 3G a call, and Mike at the Kart shop. Mark pointed me to a great deal on a radiator from Spike Products. There are several places to get engines from, SRS (obviously great and local)...
- Wed Oct 20, 2010 7:29 am
- Forum: Shifter Karts
- Topic: Cornering learnin curve
- Replies: 3
- Views: 11489
Re: Cornering learnin curve
Right on, thanks guys!
Hopefully I will figure it out a little more before the fall 5 race.
Hopefully I will figure it out a little more before the fall 5 race.
- Mon Oct 18, 2010 8:04 am
- Forum: Shifter Karts
- Topic: Cornering learnin curve
- Replies: 3
- Views: 11489
Cornering learnin curve
Hey guys, I had my first real full speed test in my kart the other day, and I noticed something odd.... In the hairpin (turn 7) Im having a lot of "hopping" thru the turn until I wind out the steering into the next strait. All the other turns dont do that, just the one. Am I entering the t...