Search found 28 matches
- Mon May 09, 2016 9:31 am
- Forum: NTK Track Forum
- Topic: Some questions about NTK and karting
- Replies: 3
- Views: 11663
Re: Some questions about NTK and karting
Lo206 will be the easiest to start with and least expensive I think and you should be able to go a full year of racing on a set or 2 of tires. Track is only open to members on non race days but membership is very affordable and gives you basically full year round access to the track except a few big...
- Sun Jul 19, 2015 11:29 am
- Forum: Kid Kart
- Topic: Newb Questions
- Replies: 4
- Views: 12443
Re: Newb Questions
Yes sir no gas mixing. Have had zero issues with the Honda add gas change oil every few races and keep carb clean your good. Honda motor is sealed so nothing can be changed. So you can worry about driver. And not so much on engine
- Fri Jul 17, 2015 6:03 pm
- Forum: Kid Kart
- Topic: Newb Questions
- Replies: 4
- Views: 12443
Re: Newb Questions
Kid kart one size chassis different engines legal some easier then others. If you know little to nothing would suggest the Honda kid kart motor have used both comer and Honda like the Honda better is more a spec engine class runs from 5 to 8. My daughters will be up for sale in September with both e...
- Sat May 30, 2015 6:20 am
- Forum: 4-Cycle
- Topic: Questions about Box-Stock Animal
- Replies: 9
- Views: 21147
Re: Questions about Box-Stock Animal
Medium 340 heavy is 375 as listed in lo206 Ntk rules
- Fri May 29, 2015 2:01 pm
- Forum: 4-Cycle
- Topic: Questions about Box-Stock Animal
- Replies: 9
- Views: 21147
Re: Questions about Box-Stock Animal
Yup. We run Jr but we have 2 adult classes great group
- Fri May 29, 2015 1:38 pm
- Forum: 4-Cycle
- Topic: Questions about Box-Stock Animal
- Replies: 9
- Views: 21147
Re: Questions about Box-Stock Animal
The kit you have listed looks correct never heard the lo206 mentioned as box stock if you search for lo206 rules should bring you to the briggs lo206 rules. Also Ntk does have storage sheds not sure to of cost or if any are open come join us at ntk.
- Tue May 12, 2015 10:28 am
- Forum: 4-Cycle
- Topic: New to the Forum and Track...
- Replies: 1
- Views: 8066
Re: New to the Forum and Track...
We are running a 14 /54 in Jr 2 but still new to play a bit
- Sun Mar 29, 2015 8:10 pm
- Forum: Kid Kart
- Topic: Honda Kid Kart Engine (GXH50) Lessons learned
- Replies: 4
- Views: 24447
Re: Honda Kid Kart Engine (GXH50) Lessons learned
Will do and make sure u check the clutch built came loss twice in last weeks race this week seems like,e it made it ok
- Tue Mar 17, 2015 8:55 pm
- Forum: Kid Kart
- Topic: Honda Kid Kart Engine (GXH50) Lessons learned
- Replies: 4
- Views: 24447
Re: Honda Kid Kart Engine (GXH50) Lessons learned
Good info thanks
- Wed Feb 05, 2014 10:52 am
- Forum: 4-Cycle
- Topic: chonda gearing
- Replies: 6
- Views: 16392
Re: chonda gearing
Thanks everyone got the gearing changed now just a few last touch ups on the kart and we can see how are times are
- Wed Feb 05, 2014 10:49 am
- Forum: 4-Cycle
- Topic: Chonda questions
- Replies: 3
- Views: 11996
Re: Chonda questions
Full rear bumper is required and stock fly wheel is not aloud. There are several legal fly wheels if u can see the akra rules u can see the legal ones
- Wed Nov 06, 2013 3:31 pm
- Forum: 4-Cycle
- Topic: chonda gearing
- Replies: 6
- Views: 16392
Re: chonda gearing
Thanks have some work to do think we are way off it is my daughter racing with u in the jr chonda right now but dad working on getting her something else and dad is going to give it a go think we were at a 4.7 so way off
- Tue Nov 05, 2013 12:09 pm
- Forum: 4-Cycle
- Topic: chonda gearing
- Replies: 6
- Views: 16392
chonda gearing
What is a good starting point for gearing that everyone is running trying to increase rpm and top end speed on straights we seem to have low rpm we are in the 5400 range now
- Sat Feb 23, 2013 2:49 pm
- Forum: 4-Cycle
- Topic: clone side cover question
- Replies: 6
- Views: 16091
Re: clone side cover question
any idea wich bolts it is not sure in what thread type
- Sat Feb 23, 2013 12:40 pm
- Forum: 4-Cycle
- Topic: clone side cover question
- Replies: 6
- Views: 16091
clone side cover question
trying to get legal under new clone rules do we just drill the head of side cover bolts and saftey wire them bolt to bolt not sure how else you would do it but wont to make sure thanks