North Texas Karters

bring the kart to the track Friday night and we can work on fixing the brakes.

There is one Kid Kart class, with 2 weights allowed. the heavier weight allows a different Comet clutch Part # TBD and parts #TBD with modified muffler Part Number ##TDB and Weight: 175 lbs. minimum. This has been requested to allow the heavier kids to be competitive.

The engines are bike engine. We remove the kick starter and mechanism. We also tap the jug for a pulse line to run our vacuum fuel pumps, as there is no longer a gravity fed fuel tank. Look at http://www.SharkShifter.com" onclick="window.open(this.href);return false; or http://www.fastech-...

I have seen bleeder made out of plastic 16 oz water bottles with a air nozzle on the cap used to force brake fluid through the system that works pretty good and its cheap. see me at the track and I'll show you, or see Jim Loomis who taught me.

Aaron, we have been know to bend the seat struts with large breaker bars or 6 foot iron bars.

The rule says: IKF 105.2.1.21 All weight or ballast must be painted white...

Dianna, Sounds like it will work. Since these seat bolts are now holding weights on, you will need to make sure that they are drilled on the end and have a clip or safety wire in them just as a normal weight bolt would have. Also the weights have to be painted white in color, bob

The SUPER SPORTSMAN weight with you and the kart is 340 lbs. minimum.

Yamaha Masters is with can at 340 lbs / 360 lbs if using a pipe.

bob

I would start with 3G karting, our local Briel kart shop. Their number is: 281-599-0851. bob

Matt, thanks, but I think I found one that we can make work for a lot less right now, bob

I'm looking for an 80cc shifter pipe and silencer.

Yanni-Mai is correct, we will have 2 Rotax races, one for the Challenge the other one for the club separated by a few races to allow u to switch tires.

Matt, that is correct if you want to get credit for both the Rotax Challenge (get a punch) and Club points for the club Rotax. If you leave the Mojo's on for the club race you won't get credit. bob

Try Terry Bentley, 972-276-2630.

I'll answer one of the questions: are ceramic bearings worth it. Answer: I have asked this question myself and the answer is only on the lower horsepower karts, like in the Jrs classes, where it helps. The adult karts have enough horsepower that the fractional difference in friction would not be a b...