CRG VEN-91 Brake Replacement

Information & Questions about karting in general.

Moderator: Bob Schabel

Post Reply
Brian Kuempel
Posts: 2
Joined: Thu Feb 07, 2019 7:17 pm

CRG VEN-91 Brake Replacement

Post by Brian Kuempel »

Anyone know of a drop-in replacement caliper for the CRG VEN-91? I want to replace the front calipers but would rather not replace the spindle, hub or brake discs.

Or, if anyone has any laying around, I need the front left inner half and the front right outer half.

-Brian
IMG_20190205_202536_sm.jpg
IMG_20190205_202536_sm.jpg (236.88 KiB) Viewed 6805 times
Brian Kuempel
Posts: 2
Joined: Thu Feb 07, 2019 7:17 pm

Re: CRG VEN-91 Brake Replacement

Post by Brian Kuempel »

Bolt spacing between mounting holes is 62mm.
Distance from spindle mount to caliper centerline is approx 26mm.
Mounting bolt is 8mm.

The VEN-99 caliper looks like it may be close. If anyone has a set they could measure, it would be very helpful.

Thanks in advance.
Attachments
IMG_20190210_123255.jpg
IMG_20190210_123255.jpg (97.88 KiB) Viewed 6795 times
IMG_20190210_123430.jpg
IMG_20190210_123430.jpg (128.93 KiB) Viewed 6796 times
Post Reply