clone gear ratio
Moderators: Bob Schabel, Daniel Esparza
- Charles Pou
- Posts: 5
- Joined: Sat Jul 19, 2008 6:58 pm
- Location: McKinney, TX
clone gear ratio
Have clone, ready to go. Need gear ratio for long track/ short track. Thanks
-
- NTK Webmaster
- Posts: 49
- Joined: Thu Aug 10, 2006 1:59 pm
- Contact:
Re: clone gear ratio
Charles,
Right now we are running the long track. I have a 15 tooth driver gear & a 53 tooth rear gear that seems to work pretty well. Austin had the same gearing in his Chonda. Because of the cross member on my Trackmagic Dragon I can't go bigger on the rear gear.
Right now we are running the long track. I have a 15 tooth driver gear & a 53 tooth rear gear that seems to work pretty well. Austin had the same gearing in his Chonda. Because of the cross member on my Trackmagic Dragon I can't go bigger on the rear gear.
- Charles Pou
- Posts: 5
- Joined: Sat Jul 19, 2008 6:58 pm
- Location: McKinney, TX
Re: clone gear ratio
Yaani-Mai, thanks for info. I have TrackMagic Dragon too, didn't think you could put a 4cycle on it.
Anyone with gear ratio for short track? Thanks
Anyone with gear ratio for short track? Thanks