clone gear ratio

Discussion forum for 4-Cycle classes.

Moderators: Bob Schabel, Daniel Esparza

Post Reply
User avatar
Charles Pou
Posts: 5
Joined: Sat Jul 19, 2008 6:58 pm
Location: McKinney, TX

clone gear ratio

Post by Charles Pou »

Have clone, ready to go. Need gear ratio for long track/ short track. Thanks :-)
Yaani-Mai Gaddy
NTK Webmaster
Posts: 48
Joined: Thu Aug 10, 2006 1:59 pm
Contact:

Re: clone gear ratio

Post by Yaani-Mai Gaddy »

Charles,

Right now we are running the long track. I have a 15 tooth driver gear & a 53 tooth rear gear that seems to work pretty well. Austin had the same gearing in his Chonda. Because of the cross member on my Trackmagic Dragon I can't go bigger on the rear gear.
Yaani-Mai Gaddy
www.gaddywebdesign.com
972-462-8393
User avatar
Charles Pou
Posts: 5
Joined: Sat Jul 19, 2008 6:58 pm
Location: McKinney, TX

Re: clone gear ratio

Post by Charles Pou »

Yaani-Mai, thanks for info. I have TrackMagic Dragon too, didn't think you could put a 4cycle on it.

Anyone with gear ratio for short track? Thanks :-)
Post Reply