NTK 2020

November 14, 2020

Fall 7 and Fall 8 Racing Schedule, Format and Reminders

***Only one pit pass needed for the event***

Race 1-Fall 7 Director Matt Wolfe
0800 Controlled Practice
1000 Drivers Meeting
10:30 Qualifying -5 minutes
Pre-Final 8 laps
Final 12 laps

Technical Inspection for drivers racing fall 7 only.

 *30 Minute break to change Race Directors, corner workers and racing staff. Fall 8 racing will resume immediately after.

Race 2-Fall 8 Director Mike Eddolls
Qualifying 5 Minutes
Pre-Final 8 Laps
Final 12 Laps

Final technical inspection for all drivers racing in fall 7 and fall 8 

All rules apply to fall 7 and fall 8. 

Be respectful to all the racing staff, competitors and spectators it is going to be a fast-speedy day. We need each and everyone’s good manners, cooperation and help to make it an awesome event. Thank you in advance for your cooperation.

Fuel tech will be performed regularly.

All tech items and equipment will be marked and painted after fall 7 qualifying. All drivers registered to race both fall 7 and fall 8 must have all tech items marked, painted and possibly engines sealed at this time. Seal number will be recorded by tech staff after qualifying if needed. Any driver registered for both and decides to drop fall 8 must notify the scales staff immediately at the scales after the final of fall 7 and go immediately to tech without removing paint, seals, or any tech item used during fall 7. 

If the driver is using different equipment for fall 8, the drivers must go to tech immediately after the scales for a complete technical inspection after the fall 7 final. 

The drivers registered for Fall 8 only must notify the scales and tech staff after the end of qualifying of fall 8 and have their equipment marked and painted at the scales. It is the drivers and mechanics ultimate responsibility to do so.

* Any broken seal, paint removal or items changed during fall 7 or fall 8 without the approval of the tech director only and notification to the Race Director will be under investigation and will be subject for DQ for the heat where the penalty was given.

Final Technical Inspection will follow the final heat. If the equipment used during the final inspection of fall 8 fails tech and it was also used during fall 7 the driver will be disqualified for both races. It is the driver or mechanic ultimate responsibility to make sure your equipment is within legal specs.

See you at the track.